In this study, we present a facile, one-step method for the manufacturing of all-cellulose, layered membranes containing cellulose nanocrystals (CNC), TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidized cellulose nanofibers (TO-CNF), or zwitterionic polymer grafted cellulose nanocrystals (CNC-g-PCysMA) as functional entities in combination with cellulose fibers and commercial grade microfibrillated cellulose. The presence of active sites such as hydroxyl, carbonyl, thioethers, and amines, gave the membranes high adsorption capacities for the metal ions Au (III), Co (II), and Fe (III), as well as the cationic organic dye methylene blue (MB). Furthermore, the membranes served as excellent metal-free catalysts for the decolorization of dyes via hydrogenation. A 3-fold increase of the hydrogenation efficiency for cationic dyes such as rhodamine B (RhB) and methylene blue was obtained in the presence of membranes compared to NaBH4 alone. Water-based processing, the abundance of the component materials, and the multifunctional characteristics of the membranes ensure their potential as excellent candidates for water purification systems.The present review discusses the use of cyclodextrins and their derivatives to prepare electrospun nanofibers with specific features. Cyclodextrins, owing to their unique capability to form inclusion complexes with hydrophobic and volatile molecules, can indeed facilitate the encapsulation of bioactive compounds in electrospun nanofibers allowing fast-dissolving products for food, biomedical, and pharmaceutical purposes, filtering materials for wastewater and air purification, as well as a variety of other technological applications. Additionally, cyclodextrins can improve the processability of naturally occurring biopolymers helping the fabrication of "green" materials with a strong industrial relevance. Hence, this review provides a comprehensive state-of-the-art of different cyclodextrins-based nanofibers including those made of pure cyclodextrins, of polycyclodextrins, and those made of natural biopolymer functionalized with cyclodextrins. To this end, the advantages and disadvantages of such approaches and their possible applications are investigated along with the current limitations in the exploitation of electrospinning at the industrial level.Hydrogels are an attractive system for a myriad of applications. While most hydrogels are usually formed from synthetic materials, lignocellulosic biomass appears as a sustainable alternative for hydrogel development. The valorization of biomass, especially the non-woody biomass to meet the growing demand of the substitution of synthetics and to leverage its benefits for cellulose hydrogel fabrication is attractive. This review aims to present an overview of advances in hydrogel development from non-woody biomass, especially using native cellulose. The review will cover the overall process from cellulose depolymerization, dissolution to crosslinking reaction and the related mechanisms where known. Hydrogel design is heavily affected by the cellulose solubility, crosslinking method and the related processing conditions apart from biomass type and cellulose purity. Hence, the important parameters for rational designs of hydrogels with desired properties, particularly porosity, transparency and swelling characteristics will be discussed. Current challenges and future perspectives will also be highlighted.Attributed to low cost, renewable, and high availability, cellulose-based aerogels are desirable materials for various applications. However, mechanical robustness and functionalization remain huge challenges. Herein, we synthesized a recoverable, anisotropic cellulose nanofiber (CNF) / chitosan (CS) aerogel via directional freeze casting and chemical cross-link process. The chitosan was performed as strength polymers to prohibits the shrinkage and retains the structural stability of 3D cellulose nanofiber skeleton, endowing the composite aerogel with satisfactory deformation recovery ability (without loss under 60 % stress cycled 100 times). The CNF/CS composite aerogel has ultralow density (?8.4?mg/cm3), high temperature-invariant (above 300 °C) and high porosity (98 %). The CNF/CS aerogel demonstrates anisotropic thermal insulation properties with low thermal conductivity (28?mWm-1?K-1 in rational direction and 36?mW?m-1?K-1 in the axial direction). Moreover, the composite aerogel (water contact angle ?148°) exhibited outstanding oil/water selectivity and high absorption capacity (82-253?g/g) for various oils and organic solvents. https://www.selleckchem.com/products/azd9291.html Therefore, the multifunctional CNF/CS composite aerogels are potential materials for thermal management and oil absorption applications.Silica nanoparticles (SNPs) dissolve in alkaline media, which limits their use in certain applications. Here, we report a delayed dissolution of SNPs in strong alkali induced by zinc oxide (ZnO), an additive which also limits gelation of alkaline cellulose solutions. This allows incorporating high solid content of silica (30 wt%) in cellulose solutions with retention of their predominant viscous behavior long enough (ca. 180 min) to enable fiber wet spinning. We show that without addition of ZnO, silica dissolves completely, resulting in strong gelation of cellulose solutions that become unsuitable for wet spinning. With an increase of silica concentration, gelation of the solutions occurs faster. Employing ZnO, silica-rich regenerated cellulose fibers were successfully spun, possessing uniform cross sections and smooth surface structure without defects. These findings are useful in advancing the development of functional man-made cellulose fibers with incorporated silica, e.g., fibers with flame retardant or self-cleaning properties.The homeostasis between mitochondrial function and autophagy is crucial to the physiological activity of cancer cells, and its mechanism is conducive to the development of anti-tumor drugs. Here, we aimed to explore the effect and mechanism of Dendrobium officinale polysaccharide (DOP) on colon cancer cell line CT26. Our data showed that DOP significantly inhibited the proliferation of CT26 cells and elevated autophagy level. Moreover, DOP disrupted mitochondrial function through increasing reactive oxygen species (ROS) and reducing mitochondrial membrane potential (MMP), thereby impairing ATP biosynthesis, which activated AMPK/mTOR autophagy signaling. Intriguingly, the further experiments demonstrated that DOP-induced cytotoxicity, excessive autophagy and mitochondrial dysfunction were reversed after CT26 cells pretreated with antioxidant (N-acetyl-l-cysteine). Herein, these findings implied that DOP-induced mitochondrial dysfunction and cytotoxic autophagy repressed the propagation of CT26 cells via ROS-ATP-AMPK signaling, providing a new opinion for the study of antineoplastic drugs.